Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The dip-switch no. 1 on the Faac City Master board enables you to select the operating
logic of the system (automatic or semiautomatic).
The dip-switches no. 2, 3 and 4 have been added to simplify trouble-shooting operations
during system repair/maintenance jobs.
In facts, if faults occur, you do not need to disconnect the wires from the terminal boards,
but you can override part of the circuits by positioning the dip-switches as you require.
DIP – SWITCH "OFF"
AUTOMATIC RISE ENABLED
COMMANDS ENABLED
SAFETY DEVICES ENABLED
RISE TRAVEL-LIMIT PRESSURE SWITCH
ENABLED
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
This position is to be defined according to the use and the system configuration (if no
safety device is used, it MUST be positioned to ON)
OFF position = AUTOMATIC RISE ENABLED: the traffic bollard, normally in up position,
moves to down position following a command. After the vehicle has transited through
the controlled passage (and therefore it engages and then disengages the safety
devices) the traffic bollard goes up again. If the vehicle does not pass, the traffic
bollard returns automatically to the up position after 30". If the opening command is
kept pressed, the traffic bollard remains in down position until the command is
released (timer function).
ON position = AUTOMATIC RISE DISABLED: the traffic bollard, after a first command,
moves from up to down position. Following a further command it returns up.
Default position: OFF
OFF position = COMMANDS ENABLED: the commands for the bollard movement,
connected to terminals 24/25 – 26/27 – 58/59, are in function.
ON position = COMMANDS DISABLED: the commands for the bollard movement,
connected to terminals 24/25 – 26/27 – 58/59, are disabled. If the FAAC CITY traffic
bollard does not rise, run a test by means of the push-button on the board (START) after
having momentarily disabled the external command devices.
FUNCTIONS OF THE DIP–SWITCHES OF
FAAC CITY MASTER BOARD
No. DS
DIP – SWITCH 1
DIP – SWITCH 2
FAAC S.p.A. Via Benini, 1 40069 Zola Predosa Bologna (Italia) tel. +39 051 61724
- 23 -
DIP – SWITCH "ON"
AUTOMATIC RISE DISABLED
1
COMMANDS DISABLED
2
SAFETY DEVICES DISABLED
3
RISE TRAVEL-LIMIT PRESSURE SWITCH
4
DISABLED
LEAVE ALWAYS ON
5
www.faac.it
Werbung
