FAAC 275 H600 Bedienungsanleitung Seite 45

TECHNICAL SPECIFICATIONS OF THE FAAC CITY MASTER CONTROL
Electronic control circuit
Housing for control station
Dimensions of housing
Protection class
Operating ambient temperature
Control station power supply
Protective switches
Service transformer
Max. quantity of Faac Citys that can be
connected to the control station
HOUSINGS FOR FAAC CITY TRAFFIC BOLLARDS
Dimensions
L x H x D
WALL-MOUNTED HOUSING
320 X 400 X 160
WALL-MOUNTED HOUSING
400 X 480 X 160
WALL-MOUNTED HOUSING
400 X 600 X 200
WALL-MOUNTED HOUSING
500 X 700 X 200
FLOOR COLUMN
320 X 950 X 280
Protection class IP 44
LARGER DIMENSIONS ARE AVAILABLE ACCORDING TO THE SYSTEM CONFIGURATION
STATION
for controlling the FAAC CITY traffic bollards
Thermal-magnetic 1P + N – 6A ÷ 16A – 30mA -
Max 10 FAAC CITY devices with simultaneous
movement – the first FAAC CITY is connected
to the master unit – the remaining devices are
connected to the additional slave units – the
housing dimension depends on the quantity
DRIVE CONTROL STATIONS
Material
PLAST 120° C
PLAST 120° C - For system with accessories and 1 FAAC CITY.
STEEL FE 37 - For system with accessories and 2 FAAC CITY.
STEEL FE 37 - For system with accessories and 5 FAAC CITY.
POLYESTER - For system with accessories and 2 FAAC CITY.
FAAC S.p.A. Via Benini, 1 40069 Zola Predosa Bologna (Italia) tel. +39 051 61724
- 16 -
With microprocessor with specific software
Standard, wall-mounted
see enclosed table
-15°C + 70°C
230V. +6/-10% - 50Hz
230/24 Vac 100VA
of FAAC CITY and on the required
accessories
System configuration
- For basic system with 1 FAAC CITY.
- For basic system with 2 FAAC CITY.
- For basic system with 3 FAAC CITY.
- For basic system with 8 FAAC CITY.
- For basic system with 3 FAAC CITY.
IP 55
6KA
www.faac.it