Technical Data; Disposal - Grundfos R100 Montage- Und Betriebsanleitung

7. Press and
8. Switch on the R100. After start-up, the R100 updates its file structure for
the new application software. This takes approximately 45 seconds.
"Updated successfully" appears in the display.

6. Technical data

Ambient temperature
–10°C to +50°C during operation.
–20°C to +60°C during storage.
Relative air humidity
Maximum 95%.
Voltage supply
2 batteries, 1.5 V, type AA.
Enclosure class
IP 40.
IR communication
Reach: Minimum 3 metres.
Transmission angle: ±12°.
Batteries
During battery replacement, the R100 will store its settings (Language, Real-
time setting, Name and address, display contrast) for at least 10 minutes.
Low-battery indicator.

7. Disposal

This product or parts of it must be disposed of in an environmentally sound
way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company or service
workshop.
simultaneously to switch off the R100.
Subject to alterations.
17