1.1 Switching on the R100
Press
to switch on the R100.
Press
and the entry display will appear.
Setting
Light
Light and contrast in display
In all displays, the light can be switched on or off by simultaneously pressing
and any of the arrow buttons.
If the buttons are not pressed for 2 minutes, the light in the R100 is automat-
ically switched off.
The display contrast can be adjusted by simultaneously pressing
or
.
1.2 Switching off the R100
Press
and
simultaneously to switch off the R100.
If the buttons are not pressed for 5 minutes, the R100 is automatically
switched off.
2. Setting the R100
Settings to be made:
• Language
• Real-time setting
• Name and address.
10
Communication
Contrast
and