Sony Bravia series Handbuch Seite 22

To detach the Table-Top Stand from the
Monitor (FW-49BZ35F, FW-43BZ35F
only).
WARNING
• Be sure the Monitor is on the vertical position
before switching on. Monitor must not powered
on with LCD panel face down to avoid uneven
picture uniformity.
• If pressure or shock is applied to the surface of
the Monitor, the Monitor may break or become
damaged.
• Lay the Monitor face down on a stable and level
surface with the Table-Top Stand hanging over
the edge of the surface. Having the Monitor face
and the base of the Table-Top Stand on the same
level surface will create an unstable working
condition and can damage the Monitor.
• When detaching the Table-Top Stand from the
Monitor, hold the Table-Top Stand securely with
both hands.
2
Attach the Attachment parts for Wall-
Mount Bracket. Check the Attachment
parts by referring to "Supplied with SU-
WL450" in "Checking the parts" on
page 18.
Note
• Firmly secure the Attachment parts using screws.
• When using an electric screwdriver, set the
torque setting to approximately 1.5 N·m
{15 kgf·cm}.
• Be sure to store the unused parts in a safe place
for future use. Retain this manual for future
reference.
22
GB
Standard mounting (2-a)
FW-65BZ35F, FW-55BZ35F
Pulley B
Belt F
Spacer
(60 mm) K Screw
FW-49BZ35F, FW-43BZ35F
Screw
(+PSW 6 x 20) C
Pulley B
Belt F
Slim mounting (2-b)
Note
• You cannot use some of the terminals on the rear
of the Monitor when using this mounting style.
FW-65BZ35F, FW-55BZ35F
FW-49BZ35F, FW-43BZ35F
Screw
(+PSW 6 x 20) C
(+PSW 6 x 50) L
Screw
(+PSW 6 x 50) L
Spacer
(60 mm) K
Soft cloth