Installing The Wall-Mount Bracket (To Sony Dealers) - Sony Bravia series Handbuch

Installing the Wall-Mount Bracket
(To Sony Dealers)
WARNING
The following instructions are for Sony dealers
only. Be sure to read safety precautions
described above and pay special attention to
safety during the installation, maintenance and
checking of this product.
Do not install the Wall-Mount Bracket on wall
surfaces where the corners or the sides of the
Monitor protrude away from the wall surface.
Do not install the Wall-Mount Bracket on wall
surfaces such as a pillar, where the corners or
the sides of the Monitor protrude away from the
wall surface. If a person or object happens to hit
the protruded corner or side of the Monitor, it
may cause injury or property damage.
Do not install the Monitor over or under an
air-conditioner.
If the Monitor is exposed to water leaks or air
current from an air conditioner for a long time, it
may cause a fire, an electric shock or a
malfunction of the Monitor.
Be sure to install the Wall-Mount Bracket
securely to the wall following the instructions
in this instruction manual.
If any of the screws are loose or fall out, the
Wall-Mount Bracket may fall and cause injury or
property damage. Be sure to use the
appropriate screws for the material of the wall
and install the unit securely using four or more
screws of 8 mm diameter (or equivalent).
Be sure to use the supplied screws and
attachment parts properly following the
instructions given in this instruction manual. If
you use substitute items, the Monitor may fall
and cause bodily injury to someone or damage
to the Monitor.
Be sure to assemble the bracket properly
following the instructed procedure explained
in this instruction manual.
If any of the screws are loose or fall out, the
Monitor may fall and cause bodily injury to
someone or damage to the Monitor.
Be sure to tighten the screws securely in the
designated position.
If you fail to do so, the Monitor may fall and
cause bodily injury to someone or damage to
the Monitor.
Be careful not to subject the Monitor to shock
during installation.
If the Monitor is exposed to shock, it may fall or
break apart. This may cause injury.
Be sure to install the Monitor on a wall that is
both perpendicular and flat.
If you fail to do so, the Monitor may fall and
cause injury.
After proper installation of the Monitor,
secure the cables properly.
If people or objects get tangled with cables, this
may result in injury or damage to the Monitor.
Do not allow the mains lead or the connecting
cable to be pinched.
If the mains lead or the connecting cable is
pinched between the unit and the wall or is
bent or twisted by force, the internal conductors
may become exposed and cause a short circuit
or an electrical break. This may cause a fire or an
electric shock.
The screws needed to secure the Wall-Mount
Bracket to the wall are not supplied.
Use the appropriate screws for the wall material
and structure when mounting the Wall-Mount
Bracket.
GB
9
GB