Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer
in position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar nut over the hose
and threaded base and tighten the collar nut
by hand. If there is not enough space, please
use only the slide washer and the metall
without the plastic washer.
4. Tighten screws.
5. Connect the connecting hose to the angle
valves; cold right - hot left.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by lifting the lever head.
Swivel to the left = hot water,
swivel to the right = cold water.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Rate of flow by 3 bars:
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 1.5 bars.
English
Spare parts
1
1.1 screw cover basin
2
3
4
5
6
7
8
9
10 fixation cpl.
11 connection hose
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
11 l/min
handle
flange
nut
cartridge cpl. basin
service set
seals (5)
mixer ball
mousseur cpl.
washer
fixation extension 35 mm
31091000
94186000
95046000
94106000
14095000
13952000
13962000
13964000
13085000
94850000
13961000
95050000
13898000
Werbung
Inhaltsverzeichnis
