Cleaning And Maintenance - Concept ZV1010 Bedienungsanleitung

EN
USAGE
Before putting the appliance in operation, choose a suitable place for it - a stable, flat surface. To ensure proper air
circulation, it should be placed at least 10 cm away from walls and other objects and 60 cm from the floor. Place the
unit on a waterproof surface so that water does not damage the furniture or the floor.
Do not place it directly on carpet, towels, blankets or other absorbent surfaces. The manufacturer is not responsible
for damage to property caused by water leakage.
Filling the water tank with water
Ensure that the appliance is disconnected from the mains.
1. Remove the tank from the base of the appliance.
2. Turn the tank upside down and turn the cap counterclockwise.
3. Pour clean cold water into the tank.
4. Close the tank by turning the cap clockwise. Ensure the cap is FIRMLY tightened.
5. Put tank back to the base of the appliance.
Essential aromatic oil (not included) can be added to the water. The water tank material and the water tank
cover cap are anticorrosive.
ON/OFF button
• Press the button once: The appliance switches on with low mist output.
• Press the button twice: The appliance switches to high mist output.
• Press the button third time: The appliance switches off.
Note: If the water level in the water tank is insufficient, the appliance switches off. LED lighting works further. To continue
running the appliance, pour water into the tank.
LED lighting button
• Press the button once: LED lightning will turn on. The colours change automatically.
• Press the button twice: Keeps the current colour. The colours do not change furthermore.
• Press the button third time: The LED lightning turns off.
Note: The LED function can be used separately, the mist function may not be on. If the mist function and the LED
lightning are turned on and the appliance is switched off with the on/off button, both of the active functions are turned
off. If the appliance shuts down due to lack of water in the water tank, the LED lighting works further.

CLEANING AND MAINTENANCE

Cleaning brush
The package includes a cleaning brush for cleaning the ultrasonic disk from dust and other dirt.
General cleaning instructions
• Before manipulating with the appliance, disconnect it from the mains first.
• Internal part of the appliance: Drain excess water from the tank. Wash the unit with clean water and if necessary,
use a cleaning brush and a soft cloth. Do not immerse the base of the appliance in water and prevent water from
entering the dry air outlet of the appliance.
• Water tank: Empty the water tank. Remove the nozzle and clean the tube with clean water and a bottle cleaning
brush (not included in the package).
58
ZV1010