Herunterladen Diese Seite drucken

Sanus VMAA18 Montageanleitung Seite 8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Step 6: Hang the assembly onto the Wall Plate
CAUTION: This step may require two people to lift the assembly onto the Wall Plate. Sanus is not responsible for injury
or property damage.
Orient the Arm Assembly (B) so that the arm extends directly away from the television and the transfer plate is parallel with the
television. Lift up the assembly and hook the transfer plate onto the tab on the top of the Wall Plate (A) as shown in Diagram 6a.
Horizontally adjust the transfer plate side to side on the Wall Plate until it is in the desired location.
CAUTION: Make sure the Safety Bolt (N) is tight. A loose Safety Bolt will result in an unstable installation which may result in
property damage and/or personal injury.
Thread each Safety Bolt (N) into one of the two holes in the bottom of the transfer plate and tighten them so that they are behind
the tab on the bottom of the Wall plate as shown in Diagram 6b.
Diagram 6a
Transfer
Plate
Step 7: Leveling the Monitor and Adjusting the Tension
CAUTION: Do not remove the Tension Nuts labeled in Diagram 7. Removing Tension Nuts will result in property damage.
Once the television is mounted onto the Wall Plate (A), and the Safety Bolts (N) are tight, it can be adjusted to level. Slightly loosen
the two Allen Bolts on the back of the Arm Assembly (B). Once those two bolts are loosened, the television can be adjusted ±6º
until level. When the television is level retighten the two Allen Bolts. The tilt can be adjusted by setting the tension of the Knobs
and tilting the television. The Tension Nuts labeled in Diagram 7 can be slightly loosened or tightened to adjust the tension of the
Arm Assembly. If you need to adjust the Tension Nut closest to the TV, you must remove the Safety Bracket, adjust the tension and
re-install the Safety Bracket as shown in Safety Bracket Installation.
Bracket
Knobs
6901-100016_ML.indd 9
6901-100016_ML.indd 9
Wall
B
A
Diagram 7
Tension
Safety
Nut
Allen
Bolts
Diagram 6b
Safety Bracket Installation
B
A
N
Tension
Tension
Nut
Nut
Detailed View
Bottom
Tab
N
Safety
Bracket
10/27/06 9:03:57 AM
10/27/06 9:03:57 AM

Werbung

loading