Swagelok Series 5 Bedienungsanleitung Seite 24

24 Series 5 Weld Head User's Manual
Mating the Weld Head to the Fixture Block
1. Rotate the locking lever on the weld head counterclockwise
until it stops. See Figure 25.
2. Insert the weld head into the fixture block. See Figure 26(A).
3. Rotate the locking lever clockwise to secure the weld head.
See Figure 26(B).
Figure 25 Releasing the Locking Lever
Figure 26 Mating the Weld Head to the
Fixture Block