Changing Channels - Pioneer PDP-436RXE Bedienungsanleitung

Watching TV
(front view)
Channel display
AAA
STEREO
10:00
STANDARD
FULL
CHANNEL +/–
8

Changing channels

Using P +/P – on the remote control unit
• Press P + to increase the channel number.
• Press P – to decrease the channel number.
When viewing Teletext information:
• Press P + to increase the page number.
• Press P – to decrease the page number.
For Teletext, see "Using the Teletext Functions" on pages 41
and 42.
NOTE
• CHANNEL +/– on the Plasma Display operates the same as
P +/P –.
• P +/P – cannot pick up channels that are set to skip. For
Channel Skip, see steps 13 and 14 under "Using Manual
Adjust" (page 25).
Using 0 – 9 on the remote control unit
Select channels directly by pressing buttons 0 to 9.
EXAMPLE
• To select channel 2 (1-digit channel), press 2.
• To select channel 12 (2-digit channel), press 1 then 2.
When viewing Teletext information:
View a page directly which is 3-digit page number from 100 to
899 by pressing buttons 0 to 9. See page 41.
NOTE
• In the standby mode, when you press 0, the power turns on
and images come from the INPUT 1 source. Or, when you
press any button from 1 to 9, TV images display.
06
19
En