Safety; Packaging, Storage And Maintenance; Packaging; Storage - Bernard Controls AQ SWITCH RANGE series Handbuch

1 SAFETY

This device complies with current applicable safety standards.
Installation, maintenance and use of this unit require a skilled and
trained staff.
Please carefully read this whole document before mounting and
starting-up the actuator.

2 PACKAGING, STORAGE AND MAINTENANCE

Packaging

AQ actuators are delivered in a cardboard box of a size equivalent to
the actuator and sit in a cardboard wedge.

Storage

Actuators should be stored under a shelter, in a clean and dry place
and protected from wide temperature variations.
•
Avoid placing the actuator directly on the floor.

•
Check that plugs on cable entries are correctly tightened.
•
Check that cover screws are correctly tightened to ensure
weatherproof sealing of the cover.
AQ actuators include electrical components and lubricated gears.
Even with a weatherproof enclosure, oxidation, seizing and other
alterations may occur if actuators are not correctly stored.
Heating element should be connected to power supply especially

if the storage place is wet (standard 230 VAC, except
otherwise specified).
What to check after storage
1. Visually check the electrical equipment.
2. Manually operate micro-switches, buttons, selectors, etc., to
ensure their proper mechanical functioning.
3. Manually operate the actuator.
English
4