Troubleshooting - Concept VP8010 Bedienungsanleitung

EN
EN
CLEANING AND REPLACING THE AIR OUTLET FILTER
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance's rear section (Fig. 5).
2. Remove the air outlet fi lter. You can clean this fi lter by tapping it, then brushing it
with a soft brush. After this operation is complete, you may clean a very dirty fi lter by
washing and brushing with a soft brush in lukewarm water with no cleaning agents
added. It is important to let the wet parts dry thoroughly. A wet fi lter will be dam-
aged by vacuuming! Do not use a hair dryer to dry it!
Note: Wet cleaning may cause more wear and tear of the fi lter and, consequently,
may shorten its service life.
3. Insert the cleaned or new air outlet fi lter into the appliance and close the air outlet
Note:
grid.

TROUBLESHOOTING

Problem
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
SMS dust bags (5 units + 2 units of motor fi lters)
Motor fi lter
VP9181 VP8010 VP8011 VP8012
Cause
Order code sms9000
Order code 44291670 Price according to the valid price list
(Fig. 5)
Solution
Disconnect the cable from the socket.
Priced according to the valid price list
29 29