Cognex In-Sight VC200 Bedienungsanleitung Seite 26

Connect to a Display (Optional)
CAUTION: If using the In-Sight Profiler integrated development environment
(IDE), Cognex recommends only cold-plugging the HDMI cable and display;
turn the vision controller power off when connecting or disconnecting the
HDMI cable.
Note: To avoid electromagnetic interference, the HDMI cable must be
shielded. A shielded Cognex accessory HDMI cable (CCB-HDMI-VC200-05)
is available for purchase separately.
1. Connect a locking HDMI cable to the vision controller's VIDEO OUT port
and tighten the thumb screw to secure it to the vision controller.
2. Connect the other end of the cable to the display.
25