Unit Description - Vitek VT-1608 BK Betriebsanweisung

ENGLISH
SLOW JUICER
What is a slow juicer?
This kind of juice extractors is provided with a
low (80-90 r/min) screw rotation speed juicing
technology, with power consumption of about
300 W. Such juice extractors are called «slow
juicers», but don't be misled by this name,
the slow juicer extracts juice faster and with
higher juice extraction rate, than regular juice
extractors. The spiral screw chops the prod-
uct, then pushes the chopped pulp through
the filter, extracting juice; thanks to this tech-
nology the extracted juice retains more phyto-
nutrients* contained in pigmented fruits and
vegetables. Low screw rotation speed (80-90
r/min) and low product temperature while
chopping preserve inner cellular structure of
ferments, microelements and vitamins in the
extracted juice.
* The term «phytonutrients» comes from the Greek word «phyto»
(«plant») and «nutrient» («food component that is necessary for
normal functioning of body»). Phytonutrients are also known as
phytochemicals, i.e. natural biologically active components of
vegetable products.

UNIT DESCRIPTION

1. Pulp container
2. Motor unit
3. Operation mode switch «I/0/R»
4. Processing bowl
5. Separator
6. Mesh filter
7. Screw
8. Lid
9. Feeding chute
10. Food tray
11. Pusher
12. Juice cup
13. Silicone gasket
Cleaning brush
14.
SAFETY MEASURES
Before using the unit, read these instructions
carefully. Keep these instructions for future
reference.
Use the unit for intended purposes only, as
specified in this manual. Mishandling the unit
can lead to its breakage and cause harm to
the user or damage to his/her property.
• Before using the unit for the first time,
make sure that voltage in your mains cor-
responds to the unit operating voltage.
Attention! The maximal continuous opera-
tion time is 30 minutes with a 10-15 min-
ute subsequent break.
• Power cord is equipped with "euro plug";
plug it into the socket with reliable ground-
ing contact.
• In order to avoid fire do not use adapters
for connecting the unit to the mains.
• Place the unit only on a dry flat and stable
surface, away from heat sources, mois-
ture, open flame and direct sunlight.
• Before using the unit for the first time wash
all removable parts that will contact pro-
cessed foods thoroughly.
• Check the mesh filter before every usage
of slow juicer. If you find any mechanical
damage, stop using the unit and contact
an authorized service center.
• Use only the removable parts supplied
with the unit.
• Do not use the unit outdoors.
• Do not place the power cord near hot sur-
faces, heat sources and sharp edges of
furniture.
• Before using the unit make sure that all
parts are set properly.
• Never push products into the feeding
chute with your fingers or other objects
during operation. Use the pusher.
• The unit is not intended for chopping or
mixing of products.
• Do not disassemble the juice extractor, if
its power plug is connected to the mains
socket.
• Do not touch the power plug with wet
hands.
• Open the lid only after the unit is switched
off and the screw has stopped.
• If some moisture or juice drops appear on
the juicer body, switch the unit off, unplug
it and wipe its body with dry cloth.
• After the end of operation switch unit off
and pull the power plug out of the socket.
4