Technical Specifications - Vitek VT-1621 W Betriebsanweisung

The continuous operation time is 1 minute; make
at least 1 minute breaks between operation cy-
cles. Make a 90 minute break after 10 operation
cycles.
CLEANING
ATTENTION! Be very careful when removing the
knife block (20) from the blender bowl (19) or the
chopping knife (12) from the processing bowl
(4) or when removing the slicing/grating attach-
ments (9-11)! The knives' blades and the blades
of the slicing/grating attachments are sharp and
dangerous. Handle these knives and attach-
ments very carefully!
– Switch the unit off and unplug it before cleaning.
– Remove all the used parts and attachments.
Note: It is recommended to preliminary wash the
blender bowl (19) before removing the knife block
(20).
– To remove the knives (20), turn the knife block (20)
in the direction of the arrow «OPEN» and remove it
together with the sealing gasket.
WARNING: The cutting edges of the knives are
very sharp, handle them with extreme caution!
– Wash the blender bowl (19) with warm water and
neutral detergent, rinse and dry.
– Wash all removable parts and attachments with
warm water and a neutral detergent, then rinse
them and dry.
– Clean the motor unit (1) with a slightly damp cloth
and then wipe it dry.
– Put the plastic protective covers on the chopping
knife (12) after washing it and drying.
– Do not use abrasives and solvents to clean the
motor unit (1) and any removable parts.
– After processing of salty and sour products it is
better to rinse all the parts and attachments with
warm water.
– When possessing products with strong dyeing
properties (for instance carrot or beet-root) the
bowls and attachments can get colored. Wipe the
attachments and bowls with a cloth dampened in
vegetable oil and then wash them.
– After washing the knife block (20) and the sealing
gasket, install the knife block (20) and the seal-
ing gasket into the blender bowl (19) and turn it in
the direction of the arrow «CLOSE» until it is com-
pletely fixed.
VT-1621.indd 7
– Do not put the removable parts and any attach-
ments in a dishwashing machine.
DO NOT IMMERSE THE MOTOR UNIT (1), POWER
CORD AND POWER PLUG INTO WATER OR ANY
OTHER LIQUIDS.
STORAGE
– Clean the unit before taking it away for storage.
– Do not wind the power cord around the motor
unit.
– Keep the food processor away from children in a
dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Bowl – 2 pc.
Lid – 2 pc.
Disc holder – 1 pc.
Grating/slicing attachments – 2 pc.
French fries attachment - 1 pc.
Chopping knife – 1 pc.
Dough kneading attachment – 1 pc.
Beating/mixing attachment – 1 pc.
Citrus juice extractor separator – 1 pc.
Juice extractor cone – 1 pc.
Pusher – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~50 Hz
Maximal power consumption: 1000 W
The manufacturer preserves the right to change the
specifications of the unit without a preliminary noti-
fication.
Unit operating life is 3 years.
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance was
purchased. The bill of sale or receipt must be pro-
duced when making any claim under the terms of this
guarantee.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
7
ENGLISH
16.12.2013 9:49:08