Before The First Use - Vitek VT-4224 W Betriebsanweisung

BEFORE THE FIRST USE

After unit transportation or storage under cold
(winter) conditions, it is necessary to keep it
for at least two hours at room temperature.
Unpack the unit, remove any stickers and
–
package materials that can prevent multi-
cooker operation.
Place the multicooker on a flat heat-resistant
–
surface away from all kitchen heat sources
(such as gas cooker, electric cooker or cook-
ing unit).
Place the multicooker keeping at least 20 cm
–
gap between the multicooker body and the
wall and 30-40 cm gap above the unit.
Do not place the multicooker close to the
–
objects that can be damaged by the released
steam of high temperature.
Attention! Do not place the unit near bath
tubs, kitchen sinks or other containers filled
with water.
Open the lid (4) by pressing the button (5) and
–
remove the bowl (11).
Wash all removable parts with a soft sponge
–
and a neutral detergent: bowl (11), steam
cooking basket (17), soup ladle (18), spatula
(19) and measuring cup (20). Then rinse them
under running water and dry.
Clean the unit body (1) and lid (4) with a damp
–
cloth, and then wipe them dry.
SHORT DESCRIPTION OF CONTROL PANEL
(2) BUTTONS
Every pressing of the control panel buttons is
accompanied by a sound signal.
COOKING PROGRAMS
Program
Porridge
Pasta
Baking
Rice
Boiling/Steam cooking
Jam
Soup
Roasting
Drinks
Cabbage rolls
Stewing
VT-4224.indd 5
«MENU» Button (13)
In standby mode (the symbols «88:88» on the
display) press the button (13) to switch to the
cooking programs selection.
«+/-» buttons (14)
Use the «+/-» buttons (14) to select the cooking
program, to set the cooking time and the temper-
ature as well as the delayed start function.
Button (15)
Use the button (15) for switching the unit from the
sleep mode (the symbols «- - - -» on the display)
to the standby mode (the symbols «88:88»), for
switching the cooking program on or off as well
as for reswitching to the standby mode or to the
sleep mode.
«DELAYED START» button (16)
Using the delayed start function you can set
the cooking end time. See the list of programs
with available delayed start function in the table
«Cooking programs».
Having selected the cooking program, press
the «DELAYED START» button (16), then set the
delayed start time from 1 hour to 24 hours with
1 hour step using the buttons (14) «+/-».
Example: If you set the delayed start time
for 2:00 and the selected program runtime is
50 minutes, the unit will stay in the delayed start
mode during 1 hour 10 minutes, and then the
cooking process will start.
Attention! Never leave the operating unit
unattended.
Default time Cooking time
(hours) (hours)
0:20 0:15 – 1:10
0:20 0:15 – 0:40
0:45 0:30 - 2:00
not available not available
0:15 0:05 - 2:00
0:30 0:20 - 4:00
1:00 1:00 - 4:00
0:30 0:10 - 1:00
0:30 0:05 – 0:40
0:20 0:15-1:00
0:15 0:05 -4:00
5
ENGLISH
Delayed start Keep warm mode
+ +
+ +
not available +
+ +
+ +
+ not available
+ +
not available not available
+ +
+ +
+ +
26.08.2014 14:20:59