Before The First Use - Vitek VT-4212 BK Betriebsanweisung

• Never allow children to use the unit as a toy.
• For children safety reasons do not leave polyethyl-
ene bags, used as a packaging, unattended.
• Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
• This unit is not intended for usage by children or
disabled persons unless they are given all the nec-
essary and understandable instructions by a person
who is responsible for their safety on safety mea-
sures and information about danger that can be
caused by improper usage of the unit.
• Do not use the unit outdoors.
• To avoid damages, transport the unit in original
package only.
• Never pull the power cord, when disconnecting the
unit from the mains, take the power plug and care-
fully pull it out of the socket.
• Never use the unit if the power cord or the power
plug is damaged, the unit works improperly or af-
ter it was dropped. Do not try to repair the unit by
yourself. Contact an authorized service center for
all repair issues.
• Keep the unit away from children in a dry cool place.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
USING OF THE COOKING BOWL (12)
• Use the multicooker and its removable parts for the
intended purposes only.
• Do not use the bowl (12) with other heating units or
cooking surfaces.
• Do not use other containers for cooking instead of
the bowl (12).
• Always make sure that the heating element (9) sur-
face and the bottom of the bowl (12) are clean and dry.
• To avoid damage of the non-stick coating never
chop hard products in the bowl (12).
• Never leave or keep any foreign objects in the bowl
(12).
• When cooking food in the bowl (12) stir it only with
the spatula (21) or soup ladle (22). You can also use
wooden, plastic or silicone kitchen accessories.
• Do not stir products in the bowl (12) with metal ob-
jects which can scratch the non-stick coating.
• After cooking dishes with spices and seasonings
wash the bowl (12) right after cooking.
• Do not put the bowl (12) into cold water right after
cooking, let it cool down first. It will help to avoid
damage of the non-stick coating.
• The bowl (12) is not intended for washing in the
dishwashing machine.

BEFORE THE FIRST USE

After unit transportation or storage at low tempera-
ture it is necessary to keep it for at least two hours
at room temperature before switching on.
– Unpack the unit, remove any stickers and package
materials that can prevent normal operation of the
multicooker.
VT-4212_IM.indd 5
– Place the unit on a flat, heat-resistant surface away
from all kitchen heat sources (such as a gas cooker,
electric cooker or cooking unit).
– Place the multicooker keeping at least 20 cm gap
between the multicooker body and the wall and 30-
40 cm gap above the unit.
– Do not place the multicooker close to the objects
that can be damaged by the released steam of high
temperature.
Attention! Do not place the unit near bath tubs,
kitchen sinks or other containers filled with water.
– Open the lid (4) by pressing the button (5) and re-
move the bowl (12).
– Remove the steam valve (6) and open it by turning
its lower part in position «LOOSEN».
– Wash all removable parts in warm water with a neu-
tral detergent: steam valve (6), bowl (12), spatula
(21), soup ladle (22), measuring cup (23), steam
cooking basket (24), cups (25), and lids (26). Then
rinse them under running water.
– Scald the cups (25) and lids (26) before making
yogurt.
– Dry all the removable parts thoroughly.
– Clean the unit body with a damp cloth, then wipe
it dry.
– Assemble the steam valve (6) by turning the lower
part of the valve clockwise until it is fixed (position
«T»). Install the steam valve (6) back to its place.
CONTROL PANEL BUTTONS (2)
Cooking program buttons (16)
To select a cooking program, press the appropriate but-
ton (16) once or twice. The time of default program will
be shown on display (3).
Example: Press the «RICE/SOUP» button once to
choose the «Rice» program, the button indicator will
light up green.
Press the «RICE/SOUP» button twice to choose the
«Soup» program, the button indicator will light up red.
Attention!
–
The multicooker automatically switches to the
operating mode in about 10 seconds after you
switch one of the buttons (16), change program
operating time with buttons (15) «-»/(20) «+» or
set the delayed start time with the «DELAYED
START» button (18), and the «COOKING» indica-
tor (13) will light up.
–
To reset program settings or cancel the cook-
ing program, BE SURE to press the «STOP» but-
ton (19), the «8888» symbols will light up on the
display.
– Never leave the unit connected to the mains
unattended.
«MULTICOOK» button (17)
The «Multicook» program allows the user to set his own
temperature and cooking time.
– Press the «MULTICOOK» button (17).
– Press the «MULTICOOK» button (17) again, the
«100°С» symbols will be shown on the display (3),
5
ENGLISH
06.08.2013 12:38:36