Inogen One G2 Benutzerhandbuch Seite 33

High Priority Alerts
CAUTION If you are not near the Inogen One® G2 you may not be able to hear or
see the high priority alerts. Make sure the Inogen One® G2 is in a
location where the alerts and alarms will be recognized if they occur.
The following high priority alert messages are accompanied by a five beep pattern,
repeated every 10 seconds and a flashing red light.
Message Display & Text
Battery Empty
Attach Plug
Battery HOT
Shut Down
System HOT
Shut Down
Condition/Action/Explanation
Concentrator has insufficient battery power to produce
oxygen. Attach external power supply or exchange battery,
then restart unit if necessary by pressing On/Off button.
Battery has exceeded temperature limit while concentrator
is running on battery power. Concentrator has stopped
producing oxygen. If possible, move concentrator to a
cooler location, then turn power off and back on. Ensure air
intake and outlet vents have clear access and particle filter
is clean. If condition persists, switch to a backup source of
oxygen and contact your equipment provider.
Concentrator temperature is too high and oxygen
production is shutting down. Ensure air intake and outlet
vents have clear access and particle filter is clean. If
condition persists, switch to a backup source of oxygen and
contact your equipment provider.
Audible and Visible Signals Chapter 4
29