Velleman CAMIP5 Bedienungsanleitung Seite 6

• Open the options menu by right clicking on a listed camera.
Note: only when the camera is fully initialised all options become visible.
Basic properties
• Shown some general information about the camera:
Network Configuration
• View/change the network settings of the camera:
• When connected to a DHCP router, check the 'Obtain IP from DHCP server' checkbox, otherwise
uncheck it and fill in the data manually.
• In case of a subnet mismatch, change the IP-address or subnet mask.
• When in doubt about the network settings, contact a qualified network administrator.
03.05.2010
CAMIP5
6
Rev.01
©Velleman nv