Velleman CAMIP5 Bedienungsanleitung Seite 16

Upgrade Device Firmware
• Only use this option when problems with the current version are noticed. Do not upgrade if the
camera works fine.
• Caution: when the upgrade process is interrupted or a wrong version is installed the camera
might not work anymore.
• When clicking on Upgrade Device Firmware or Embedded Web UI (User Interface), a brower
window is opened. Locate and select the new firmware/web UI.
Restore Factory Settings
• Selecting 'OK' will clear the memory and reset the device to factory settings. All settings, e.g.
user settings, mail and FTP settings, alarm schedule... are lost.
Reboot Device
• Select 'OK' to reboot the camera.
Note: this will reset the system time. Refer to Date&Time settings.
Log
• The log shows an overview of everyone who accessed the IP camera. It is cleared when rebooting
the system.
03.05.2010
CAMIP5
16
Rev.01
©Velleman nv