Ricoma PSP-990 Bedienungsanleitung Seite 8

STEP5-STEAM CONTROL
IMPORTANT NOTE: Steam is produced only when the Temperature Control
Dial is set to the higher temperatures.
a. The Temperature Control Dial must be set high enough to have sufficient
heat to produce steam. The center Temperature Ready Light goes off when the
unit has reached the desired temperature. The Steam Ready Indicator Light, the
right most light on the indicator row, will come on when the unit is ready
to produce steam.
IMPORTANT NOTE: If this is the first time you are using the Steam Press or
you have been storing it for some time, lift the Pressing Plate into the raised
position and press one of the Steam Burst Bottons several times until the steam
begins to flow.
IMPORTANT NOTE: The Steam Burst function can only be used when the
Steam Ready Light is on AND the steam press is in an opened position. Do not
use the Steam Burst function when the steam press is closed, or you may damage
the unit.
If the supply cord is damaged, it must be replaced by the manufacturer or
its services agent or a similarity qualified person in order to avoid a hazard.
Steam Press Instruction Manual Page 7