Techniques For Pressing - Ricoma PSP-990 Bedienungsanleitung

TECHNIQUES FOR PRESSING

LARGE PIECES OF FABRIC:
TO press large pieces of fabric, place the entire piece in the storage area behind the Ironing Board, The area you want
to press first is on the top of the pile.
a. Pull the fabric towards you, over the Ironing Board and lower the pressing plate, pressing each section as you
move the fabric forward, Allowing the fabric to drape in this manner will preserve the pressing and give you a
complete job free of wrinkles.
SHIRTS and BLOUSES:
a. Place the shoulder yoke( A ) on the Ironing Board first , face down and press.
b. Place the sleeves ( B ) on the Ironing Board, next with the fold parallel to the long seam and press.
c. Place the cuffs ( C ) on the end of the Ironing Board and press.
d. Place the body of the shirt ( D ) into the storage area between the pressing Plate and Ironing Board, away from you.
Place the side front of the shirt including the placket, or pocked.
e. Pull the shirt towards you and continue to press each area until complete.
f. Place the shoulder yoke ( E ) flat on the Ironing Board, Press to remove the crease.
g. Place the collar ( F ) right side up on the Ironing Board and press.
Page 13
Steam Press Instruction Manual