Use Of The Pressing Cushion - Ricoma PSP-990 Bedienungsanleitung

USE OF THE PRESSING CUSHION

Some garments have been constructed with details, such as darts. Curved seams and shoulder pads, which are not
intended to be pressed flat A Pressing Cushion is supplied with your Steam Press for use with these areas.
a. Use the cushion whenever pressing areas where no creases are desired or to shape tailored garments.
b. Place the area to be pressed onto the Ironing Board.
c. Place the pressing Cushion under the dart seam etc.
d. Making sure the area to be pressed is raised, lower the Pressing Plate. The raised area is the only area the Plate
should contact.
IMPORTANT NOTE: DO NOT attempt to lower the Pressing Plate to its lowest position or lock the Pressing Plate
against the Ironing Board with the Pressing Cushion in place. You MAY DAMAGE the Steam Press by doing so.
e. Raise the Pressing Plate after a few seconds.
Page 12
Steam Press Instruction Manual