Ricoma PSP-990 Bedienungsanleitung Seite 11

STEP8-CLEANING (As required)
a. Cleaning the Pressing Plate:
Place the Pressing Cushion in the center of the Ironing Board.
Place a clean towel over the Pressing Cushion and the Ironing Board.
Set the Steam, Control and Temperature Control to their maximum
setting.
When the Ready Light comes on, gently lower the Pressing Plate
onto the Pressing Cushion.
With water in the reservoir tank, press the Steam Burst Control 6 to
7 times, Be careful to avoid touching the hot metal surfaces or
leaving your hand in the bursts of steam.
b. Once the Pressing Plate has cooled down you can clean the
surface with a damp cloth. DO NOT use any abrasives on the
Pressing Plate.
c. The Ironing Board Cover is removable for normal washing, You
can rinse the Ironing Board Cover with mild detergent and warm
water.
Page 10
Steam Press Instruction Manual