Ricoma PSP-990 Bedienungsanleitung Seite 7

STEP4-SELECTING THE TEMPERATURE
a. Turn the temperature Control Dial(A)until it points to the kind of fabric
you wish to press.
b. Examine the garment label if unsure and look up the type on the chart(B)
Below:
Nylon
Acetate
IMPORTANT NOTE: If you cannot determine the type of fabric, begin with
the lowest setting and increase the temperature as desired until you obtain the
proper results.
c. When the Ready Light(C)goes off, the Pressing Plate has reached the temperature for the desired setting.
d. When changing the setting from a higher selection to a lower setting allow several minutes for the Pressing Plate to
coll sufficiently after making the change.
IMPORTANT NOTE: You may find it more efficient to arrange your fabrics from those requiring the lowest setting
to those requiring the highest setting and proceed accordingly. This will avoid any unnecessary delay or wait for the
Pressing Plate to cool.
Page 6
Silk Wool Cotton
Polyester Triacetate
Rayon
Linen
Steam Press Instruction Manual