Suggestions For Success - Ricoma PSP-990 Bedienungsanleitung

SUGGESTIONS FOR SUCCESS

USING A PRESS CLOTH:
a. Placing a press cloth(a piece of clean fabric) between the fabric and the Pressing Plate may be
desirable, especially for more delicate fabrics.
OLDER STYLE BUTTONS AND ZIPPERS:
b. While most modern buttons and zippers require no special attention, some older types may be
heat sensitive. Take care with items that could melt, Lower the heat or steam settings, place the
items FACE DOWN on the ironing board, and cover the fabric with a press cloth BEFORE
pressing, This will help protect delicate accessories and fasteners.
SPRAY BOTTLE METHOD:
c. Using a Spray Bottle, lightly spray the garment before placing it on the Ironing Board. This
helps to distribute an even, fine mite over the fabric, preparing it to be pressed, and removing
all wrinkles.
DAMP CLOTH METHOD:
d. For the most stubborn or heavy gauge fabrics, place a damp cloth over the area to be pressed,
Press the garment normally for a few seconds, then raise the Pressing Plate and allow the steam
to escape, Repeat the procedure until the fabric is dry.
Page 11
Steam Press Instruction Manual