Ricoma PSP-990 Bedienungsanleitung Seite 10

STEP7-FINISHING PRESSING/STORING THE UNIT
a. Turn the ON/OFF switch to the OFF position. The red Power Indicator
Light will go out. Disconnect the plug from the outlet.
b .Wait for the Steam Press to cool completely, for at least 30 minutes before
draining.
c. Water left in the reservoir will not drip out if the machine is stored in an
upright position, However, it is recommended that if the machine will be
store for some time, that all the water in the unit be drained by pressing the
Steam Burst Button until all of the water is pumped out.
d. Lower the Pressing Plate onto the Ironing Board pushing the Handle (B)to
its lowest position.
e. Turn the Locking Knob( C ) to the locked position. This should prevent the
Steam Press from opening while being moved or stored.
f. Loosely wrap the electric cord and place it in the opening at the front of the
base(D) of the Ironing Board, You are now ready to store the unit.
Steam Press Instruction Manual
Page 9