Ricoma PSP-990 Bedienungsanleitung Seite 17

PROBLEM
No Steam.
Water drips from the Pressing Plate.
The Pressing Handle will not move
into the Automatic Maximum pres-
sure position.
Page 16
CAUSE
Water level is too low.
Controls have not been properly set.
The Steam Press is in the open position.
Temperature Control Dial has not been
set properly.
The Pressing Plate has not reached the
steam temperature setting.
Item on the Ironing Board is too thick to
use this pressure.
SOLUTION
Fill the water Tank.
Turn the Temperature Control Dial clock-
wise to a higher temperature. Wait for the
Steam Ready light to come on.
Close the Steam Press to use the control.
Turn the Temperature Control Dial clock-
wise to a higher temperature.
Wait for the Ready Light.
Use lighter pressure on thicker items.Use
added steam for wrinkles.
Steam Press Instruction Manual