Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Features; User Safety; Arrangement For Installation - Jacuzzi unique Vorinstallationsblatt

Vorschau ausblenden Andere Handbücher für unique:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
It is the responsibility of the installer/owner to ascertain
compliance with specific local regulations prior to installa-
tion. Jacuzzi Europe S.p.A. gives no guarantee in this respect
and declines all responsibility regarding the compliance of
the installation performed.

Technical Features

The Unique (
1;
2) has a two-speed, 2 HP pump.
Unique is equipped with a cartridge filter that ensures excellent
water filtering (filtering surface: 9.3 m
The Unique hot tub is also available with perimeter panels of the
following types:
- panels with wenge finish
(only for indoor installation).
- panels with teak finish
(for both indoor and outdoor installation).
- panels in synthetic wood
(for indoor or outdoor installation).
- customizable panels, upon which coverings with a thickness of
a few millimetres can be applied.
If you want to apply thicker coverings, you can partially mill the
unfinished panel so that the covering is aligned with the corners
(
2, det. D).
Maximum absorption of the system
Total consumption
Power supply (x)
electric heater + hydro
Voltage
Hertz
Ampere
kW (j)
220-240 ~ 50/60
16 (k)
(k): at 230 V - (j): absorbed power
(x): see "Electrical preparations"
The electrical system that powers the hot tub must absolutely
be sized for maximum consumption (as shown in the table).
Weights
Net weight
average fill
kg
litres
~ 240
~ 630
support area
concentrated load
on support area
m
2
kg/m
2
~ 2.30
~ 552
2
).
Blower
Audio
(optional)
(optional)
kW (j)
kW (j)
Ampere
3,5
0,6
0,25
2,5
water volume
Total max. weight
MAX
litres
~ 1030

User safety

If installed by qualified personnel in compliance with the in-
structions in the enclosed installation manual, the system does
not present any risks for the user. However, safety is also contin-
gent upon appropriate use, according to the provisions in the
respective manual, while the user must delegate the operations
described in the installation manual to qualified personnel.
It is important to make sure that personnel tasked to install
or manage the system are qualified as per legal requirements in
effect in the country where installation is carried out.
For any extra maintenance and/or repairs it is recommended
that you contact an authorized service centre. Use only original
spare parts.

Arrangement for installation

Models with th Performance filtering unit
The filtering unit (spa-pak) can be placed in any position, but
the maximum distance from the hot tub must not exceed 4 m.
If the installation is made outdoors (in very cold areas) it is rec-
ommended to use valves that make it possible to fully drain the
pipes that connect the hot tub with the spa-pak.
If necessary, the spa-pak can be installed on a lower level (with
respect to the hot tub) with a maximum difference in level of 1
m. Greater differences in level can reduce the flow rate of the
filtration pump.
The spa-pak must be installed so it cannot be accessed by people
without the use of keys, or tools, and be protected from water
and bad weather (suitable ventilation must also be guaranteed).
Spa-Pak
(optional)
Unique requires the following plumbing connections (ar-
kW (j)
ranged as in
(k)
0,5
- B and possible B1: hot tub drainage.
NOTE: connection "B1" makes it possible to reduce the time re-
quired to drain the tub.
- C: connection of overflow; to be made in the field, after drilling
a hold in the bottom of the support base, depending on the type
of installation.
The customer must make provisions for a ground drainage point
of suitable dimensions and that can be inspected for any clean-
ing that may be required.
kg
~ 1270
Models with the Performance filtering unit: a connection
must be made to the drain for periodic back-washes and in order to
empty the sand filter if necessary. Water and electrical connections
must also be made between the spa-pak and the hot tub (see the
respective installation manual).
ATTENTION: Before preparing the ground drainage
point, consult the local authority for the regulations
that control the drainage of chemically treated water.
13
13
1 and 3):

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Unique performanceUnique

Inhaltsverzeichnis