Installing The Bar-Wl Wireless Router; Package Contents - Corega BAR-WL Bedienungsanleitung

Features
Your BAR-WL Wireless Router provides the following features:
• Allows multiple users to access Internet at the same time using a single public IP Address.
• Allows users on Ethernet LAN and wireless LAN to transfer data to each other through wireless-to-wire bridge.
• Provides wireless access roaming, best access point selection, loading balance, network traffic filtering included in wireless
roaming function.
• Provides 64bits/128bits key WEP (Wired Equivalent Privacy) wireless data encryption to secure wireless communication.
• Fully supports 802.11 open and shared key authentication.
• Integrates four switched 10/100BASE-T/TX auto-sensing ports.
• Uses NAT to allow all of your network's PCs to connect to the Internet using only one IP address.
• Supports PPPoE that enable users to seamlessly connect to ISPs with the user familiar "dial-up" type connection interface.
• Built-in web-based user interface for easy configuration and management.
• Supports DHCP client to receive both a dynamic IP Address and a fixed IP Address from ISP.
• Built-in DHCP server to automatically assign and manage LAN IP addresses.
• Block specific users from accessing specified web sites.
• Allows external Internet users to access information from the internal target host by setting the Virtual Server.
• Provides unrestricted two-way communication between one PC on your LAN and certain Internet services like conferencing,
video and gaming applications.

1. Installing the BAR-WL Wireless Router

This chapter describes un-packing, familiarization, and the hardware installation of the BAR-WL Wireless Router.

1.1 Package Contents

1 x BAR-WL Wireless Router
1 x External Power Adapter
1 x Wall Mount Kit (2 screws and 2 wall plugs)
4 x Self Adhesive Rubber Feet
1 x Vertical Desk kit
1 x Ethernet Cable
1 x Installation Guide
4