Dhcp Configuration - Corega BAR-WL Bedienungsanleitung

2.6 DHCP Configuration

A DHCP (Dynamic Host Configuration Protocol) Server can automatically assign IP Addresses to each computer in your network on
the LAN ports. Unless you already have a DHCP Server in you LAN, it is highly recommended that you set your router to act as a
DHCP server.
• Dynamic Server
Select "Enable" to use the DHCP server option of the router. If you already have a DHCP server in your network, set the
router's DHCP option to "Disable".
• Starting IP Address
Enter a numerical value, from 2 to 254, for the DHCP server to start at when assigning IP Addresses.
• Number of Users
Enter the maximum number of PCs that you want the DHCP server to assign IP Addresses to, with the absolute maximum
being 253.
• DHCP Clients List
This list shows the IP addresses that have been issued by the BAR-WL Wireless Router.
15