Wireless - Corega BAR-WL Bedienungsanleitung

2.5 Wireless

This setting page allows you to configure more advanced wireless functions.
• TX Rates
Select either 1~2 Mbps or 1~2~5.5~11Mbps auto fallback.
• Authentication Type
Select either Open System or Share Key as authentication type. If you are not sure, select Auto.
• Station MAC Filter
The router can block non-specific MAC addresses from connecting via the wireless LAN. To enable this filter, select 'Enable'.
• Active MAC Table
This shows a list of all the active MAC addresses attached to the wireless LAN.
• Edit MAC Filter Settings
This screen allows the user to enter the MAC addresses of the computers which are to be allowed access to the wireless LAN.
Each individual MAC address can be filtered if required by selecting the Filter button.
Click Apply after making any changes.
14