Sennheiser Evolution Wireless series Bedienungsanleitung Seite 57

Switching the receiver on/off
Press the POWER button
To switch the receiver off, press the
on the display. You can then release the button.
After a power failure, the device returns to the previous setting (ON/OFF).
Adjusting the AF output level
Use the AF output level control
appears at outputs
Connecting the headphones
Connect the headphones to the headphone output (PHONES)
for monitoring the audio signal.
Use the headphone volume control
Attention: First set the volume control to the lowest volume by turning
it counter-clockwise as far as possible!
Volume up? – NO!
When people use headphones, they tend to choose a higher volume
than with loudspeakers. Listening at high volume levels for long
periods can lead to permanent hearing defects. Please protect your
hearing, Sennheiser headphones have an excellent sound quality even
at low volumes.
to switch the receiver on.
POWER button until "OFF" appears
to adjust the AF signal level that
and .
to adjust the volume.
57