Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20.1 - DISTANCE BETWEEN PLANTS
The diagram (fig. 16) shows the distances which can be obtained with the three
types of distributor that can be fitted:
(fig. 16.A) Standard distributor with 10 grippers min. 23 cm max 80 cm.
(fig. 16.B) Special distributor with 15 grippers min. 18 cm max 55 cm.
(fig. 16.C) Master distributor with 10 grippers min. 13 cm max. 40 cm.
To renew the gears supplied (fig. 17.G) and obtain the distances indicated, observe
the safety regulations and proceed as follows:
-Tighten the wheel depth adjustment device (fig. 17.F) to reduce the tension of the
chain
-Remove the casing (fig. 17.A) by turning the nuts (fig. 17.B)
-Without opening the chain, support the tensioning device (fig. 17.C) with the chain
still on it
-Move the chain to the outside of the lower and upper gears
-Release the chain tensioner gradually
-Change the gears by turning the appropriate fixing screws (fig. 17.D.E), positioning
them as shown in the table (fig. 16)
-Reposition the chain making certain that it is correctly inserted on the appropriate
chain tensioner (fig. 17.C).
-Fix the casing and return the depth adjustment device to its initial position.
A
10
standard
B
15
special
C
20
master
C
D
44
23
27
32
18
21
13
16
12
12
12
26
22
19
F
E
37
42
46
52
55
25
28
32
35
37
19
21
23
25
27
14
16
18
19
18
19
19
19
18
16
G
FOXDRIVE
FOXDRIVE - DT
58
63
71
80
39
42
47
55
29
31
35
40
19
20
20
20
16
16
14
12
FIG. 16
A
B
FIG. 17
Werbung
Kapitel
