Product Description; Installation - Klarstein 10030930 Bedienungsanleitung

1 Upper basket
2 Spray arms
3 Lower basket
4 Water softener
5 Cutlery basket
6 Datergent dispenser
7 Rinse aid dispenser
8 Filter
9 Fork shelf
WARNING
Risk of electric shock! Disconnect electrical power before installing dishwasher. Failure to do so
can result in death or electrical shock..
Positioning and leveling
1. Remove the appliance from all packaging and check that it has not been damaged during transportation.
If it has been damaged, contact the retailer and do not proceed and further with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or
even with the wall. This appliance can also be recessed under a single worktop (see the Assembly instruction
sheet).
3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may
be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the
appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and
noise while it is operation.

Product Description

Installation

27