Cleaning And Care; Delivery Set; Technical Specifications - Vitek VT-2516 W Betriebsanweisung

CLEANING AND CARE

Lubricating the blades
Regularly lubricate the blades using
the oil (13) supplied with the unit.
–
–
–
Attention! Use only the oil supplied
with the unit.
DO NOT USE vegetable oil, fat, oil
mixed with any solvents for lubricat-
ing.
Solvents will evaporate, leaving thick
grease that may slow down the blades
motion.
Cleaning the hair clipper
–
–
–
–
–
–
VT-2516_100 140.indd 8
ENGLISH
Switch the unit off using the
power switch (1) and unplug it.
Apply one– two drops of oil
(13) on the teeth of the blades
(3, 4) and the back side of
the upper blade (4), switch the unit
on and make sure that the blades
are moving smoothly.
Switch the unit off; clean the
excess oil with a dry cloth.
Switch off and unplug the unit.
Clean the blades from hair, using
the cleaning brush (14).
Wipe the accessories and the unit
body with a slightly wet cloth, and
then dry them with a soft cloth.
Put the protective cover (10) on
the blades (3, 4).
Do not immerse the unit into water
or any other liquid.
Do not use solvents or abrasives
for cleaning the unit.
STORAGE
–
Before taking the hair clipper
away for storage, clean and lubri-
cate the blades (3, 4) with lubri-
cating oil (13) and put the protec-
tive cover (10) on.
–
Keep the unit in a dry cool place,
out of reach of children.

DELIVERY SET

1. Hair clipper (with blades) – 1 pc.
2. Attachment comb – 4 pc.
3. Protective cover – 1 pc.
4. Comb – 1 pc.
5. Scissors – 1 pc.
6. Lubricating oil – 1pc.
7. Cleaning brush – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 230 V ~ 50 Hz
Maximal power consumption: 7 W
The manufacturer preserves the right
to change the specifications of the
unit without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee condi-
tions can be obtained from the dealer
from whom the appliance was pur-
chased. The bill of sale or receipt must
be produced when making any claim
under the terms of this guarantee.
This product conforms to
the EMC-Requirements as
laid down by the Council
Directive
and to the Low Voltage
Regulation (2006/95/ЕС)
8
2004/108/ЕС
09.03.2016 14:51:39