Cleaning And Care; Delivery Set; Technical Specifications - Vitek VT-2572 GR Betriebsanweisung

CLEANING AND CARE

Lubricating the blades
The blades should be oiled each time before
and after using the trimmer.
•
•
•
Attention! Use only the oil supplied with the set.
DO NOT USE vegetable oil, fat, oil mixed with
any solvents for lubricating.
Solvents are subjected to evaporation, leav-
ing thick oil which may slow down the blades
motion.
Cleaning the hair clipper
•
•
•
•
•
•
•
•
•
VT-2572_105 x148.indd 7
Switch the hair clipper off with the switch
(2). While operating from the power adapt-
er (9) unplug the power adapter, remove
the cord plug of the power adapter from
the jack on the unit.
Apply one or two drops of lubricating oil
(11) on the blades teeth (5), switch the
unit on and make sure that the blades are
moving smoothly.
Switch the unit off; wipe the excessive oil
with a dry cloth.
Switch the unit off with the switch (2),
while operating from the power adap-
ter (9) unplug the power adapter, remove
the cord plug of the power adapter from
the jack on the unit.
Remove the attachment (7) or (8) by pull-
ing it upwards.
Clean the blades from the cut hair, using
the cleaning brush (10).
Hold the unit with the front part towards
you, press with your thumbs each edge
of the blade block (5) in the direction from
yourself and remove the blade block (5)
(pic. 9).
Use the brush (10) to clean the inner sur-
face and the blade block (5) from hair.
Clean the hair clipper body with a soft
damp cloth, and then wipe dry.
Do not use abrasive cleaners or solvents.
Apply one or two drops of oil on the blade
teeth and the back part of the upper blade.
Set the blade block (5) on the unit
(pic. 10), switch the unit on and make sure
that the blades are moving smoothly. Turn
off the hair clipper and wipe the excessive
oil with a dry cloth.
•
Never immerse the hair clipper and the
power adapter into water or any other liquids.
STORAGE
•
Clean the unit before taking it away for
storage.
•
Keep the unit in a cool dry place out of
reach of children.

DELIVERY SET

1. Hair clipper – 1 pc.
2. Blade block (installed) – 1 pc.
3. Attachments – 2 pc.
4. Support for charging/storing – 1pc.
5. AC/DC power adapter – 1 pc.
6. Accessories:
brush – 1 pc.
Lubricating oil – 1 pc.
7. Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power adapter: DC 3,0 V ~ 600 mA
Charging time: 8 hours
Built-in rechargeable batteries:
Ni-MH АА 2x1.2 V 600 mAh
Unit operating life is 3 years
The manufacturer preserves the right
to change the unit specifications without
a preliminary notification
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 2004/108/ЕС
and to the Low Voltage Regulation
(2006/95/ЕС )
7
ENGLISH
10.03.2016 14:07:18