Safety Advice - Foppapedretti CS28 Montageanweisungen

GB

SAFETY ADVICE

WARNING: Read these instructions carefully before use and keep this manual for future reference.
Failure to comply with these instructions may put your child's safety at risk. This base must only be
used with the Group 0+ infant car seat (type CS28) designed for this base.
This base must only be placed in a forward facing position on a car seat provided with a 3-point safety
belt according to regulation ECE R16 or an equivalent standard.
WARNING: DO NOT USE THIS INFANT CAR SEAT ON SEATS EQUIPPED WITH AIRBAGS
CS28B
INSTALLATION IN THE VEHICLE WITH BASE
Place the base onto the vehicle seat.
Pull out the support leg under the base, put the base flatly on the
vehicle seat. Push the base to the back of vehicle seat with anti-
rebound bar against the back of vehicle seat.
1
Pull vehicle belt through slot on either side of base.
1 2
Unlock the blue lock off on base, put vehicle belt through lock off and
click
belt slot on the other side, then lock the lock off. When you hear a
"click", that means the lock off is well locked.
Smoothen and fasten vehicle belt.
Adjust the length of support leg, make sure support leg touching
vehicle floor firmly.
3
8
anti-tipping bar
storage for the manual
lock off
release botton
support leg
support leg adjustment
button