Connectors And Buttons - Axis Q1635 Installationsanleitung

Status LED Behavior for Focus Assistant
Indication
Color
Green Focus Assistant is enabled
The lens is optimally adjusted
Amber The camera has been moved, or an object has been inserted in front of the lens.
Exit and restart the Focus Assistant.
The lens is less optimally adjusted.
Red The camera has been moved, or an object has been inserted in front of the lens.
Exit and restart the Focus Assistant.
The lens is poorly adjusted.
Buzzer Signal for Focus Assistant
Buzzer
Fast interval
Medium interval
Slow interval
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on the Function button used for levelling the camera, see Connectors and Buttons.
Press and hold the function button (2) for more than two seconds to level the camera.
• When the camera is level, both LEDs are steady green, and the beep is continuous.
• When the camera is not level, the LEDs flash a combination of red, green and orange, and
the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the levelling is getting better.

Connectors and Buttons

For specifications and operating conditions, see page 15.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
AXIS Q1635 Network Camera
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
13