Hardware Overview; Connectors And Buttons - Axis M3046-V Handbuch

AXIS M3046-V Network Camera

Hardware overview

Hardware overview
For specifications of the hardware components, see Technical specifications on page 61.
1 Dome cover
2
HDMI connector
3
Status LED
4
microSD card slot
5
Control button
6
Network connector (PoE)
7
Focus ring

Connectors and Buttons

HDMI connector
TM
Use the HDMI connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see the Installation Guide available at www.axis.com
SD card slot
NO NOTICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
7