Auto Mode - Philips AC4002 Benutzerhandbuch

• The appliance automatically starts operating in the auto mode.
To switch off the appliance, press and hold the on/off button again until the
power-on light goes out and unplug the appliance.
Note: When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the AIR QUALITY
lights on the control panel may indicate that the air quality is bad even though
the air quality is good. In this case, the auto mode causes the appliance to
run at high fan speed. You can solve this by cleaning the air quality sensor. If
condensation develops frequently during periods of high humidity, we advise
you to use one of the manual speed settings.

Auto mode

When the appliance is switched on, the built-in air quality sensor
automatically measures the ambient air quality. When the auto mode is
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
Note: When you use the auto mode, you can also use the timer function (see
section 'Timer function in this chapter). In this case, the AUTO light, one of the
FAN SPEED lights, the TIMER light and one of the HOUR lights are on.
1 Press the on/off button to switch on the appliance.
• The appliance automatically starts operating in the auto mode.
Note: When the appliance is operating in another mode and you want to
activate the auto mode, simply press the AUTO button.
• The AUTO light and one of the FAN SPEED lights go on. The FAN
SPEED light indicates at which fan speed the appliance is operating.
Note: When the air quality is very good and the fan speed operates at a very
low fan speed, the FAN SPEED light for the lowest speed level does not go on.
In this case only the power-on light and the AUTO light are on.
Note: The built-in air quality sensor measures the air quality and automatically
selects the appropriate speed setting to ensure the best possible air quality in
your room. When the air is clean, the appliance stops running. When the air
quality deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
ENGLISH
11