Philips AC4002 Benutzerhandbuch Seite 9

4
Remove all packaging material from the filters.
5
Put filter 4 (HEPA filter) back into the appliance.
Note: Make sure that the side with the tag points towards you.
6
Put filter 3 (Activated carbon filter) back into the appliance.
7 AC4004 only: attach filter 2 (Multi-care filter) to the back of filter 1
(pre-filter).
Note: Make sure that the front of filter 2 (Multi-care filter), that is the side with
the tag, points towards the pre-filter.
8 Place filter 1 (pre-filter) in the appliance.
Note: AC4004: make sure the Multi-care filter is attached to the back of the
pre-filter.
Note: Make sure that the side with the two projections points towards you.
Note: Make sure that all hooks are properly attached to the appliance.
ENGLISH
9