Philips AC4002 Benutzerhandbuch Seite 15

2
1
1
2
2
Place your fingers in the recesses of the side panels and gently pull the
bottom of the front panel towards you. Then lift the hooks at the top
of the panel out of the top of the appliance.
3 To remove the pre-filter, grab the two projections and pull the filter
towards you.
4
AC4004 only: remove the Multi-care filter from the back of the pre-
filter.
5
Wash the pre-filter under a running tap. If the pre-filter is very dirty,
use a soft brush to brush away the dirt.
Tip: Alternatively, you can clean the pre-filter by removing the dust with a
vacuum cleaner.
6
Air-dry the pre-filter.
Note: Make sure that the pre-filter is completely dry.
7 AC4004 only: reattach the Multi-care filter to the back of the pre-filter.
Note: Make sure that the front of the Multi-care filter is pointing towards the
pre-filter.
8 Put the pre-filter back into the appliance. Attach all hooks properly to
the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
9 To reattach the front panel, insert the two hooks into the top of
the appliance first (1). Then push the panel against the body of the
appliance (2).
10
Put the plug in the wall socket.
ENGLISH
15