Location And Function Of Parts - Sony UP-D890 Gebrauchsanweisung

Location and Function of Parts

For details, refer to the pages indicated in parentheses.
Front
RECEIVING
ON/ OFF
1 Power ON/OFF switch and indicator
Turns the power on. The indicator is lit while
the power is on.
2 RECEIVING indicator
Lights up while the printer is receiving the
data to be printed from a computer.
Turns off when the printer starts printing.
3 PAPER EMPTY indicator
Lights when the printer is out of paper.
Blinks when the thermal head protection
circuit is working against heat build-up.
4 FEED button (30)
Feeds the print paper while being pressed.
5 OPEN/CLOSE button (28)
Opens or closes the door. Also, stops the
printing.
6 Paper cutter
Cuts the print paper.
FEED OPEN / CLOSE
PAPER EMPTY
Back
DIP SW
OFF
ON
DIP SW FUNCTION TABLE
NO FUNCTION SW-ON SW-OFF
1 TYPE
PAPER
TYPE TYPE
2
3 TONE
GAMMA
TONE TONE
4
5 POSTFEED ON OFF
6 COMMAND D890 D880
7 RESERVED
8 RESERVED
7 DIP switches (26)
Sets the paper type and other printer modes.
8 Connector (36-pin amphenol) (25)
Connects a computer or other peripherals
using a quasi centronics interface cable.
To use the unit in high-speed transmission
mode (ECP mode), use an interface cable in
conformity to IEEE STD 1284 such as
Hewlett Packard C2951A.
9 AC IN (AC power input) connector (25)
Connect to a wall outlet using the supplied
AC power cord.
AC IN
37
Others