ausdom AH3 Bedienungsanleitung Seite 7

9. Protecting your Hearing
The Headphone is held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphone and
avoiding exposing yourself continuously to high volumes. If
you need to use the headphone for a long period, rest ten
minutes for a half hour using.
10. Control Instructions
Function
Power on
Pairing with wireless
devices
Power off
Increase volume
Decrease volume
Play media
Pause/restart media
playback
Skip to next track
Skip to previous track
Answer a call
End a call
Bass sound effect
Operation
When the headphone is off, press and hold the
power button 2 seconds. And the LED flashes
blue and sounds "Power on". Then flashes blue
every second.
When the headphone is off, press and hold the
power button for about 4 seconds until the LED
flash blue and red alternatively, then select the
"AUSDOM AH3" to pair.
1.Paired with SBC devices, the blue LED lights;
2.Paired with APTX devices, the blue and red
LED lights;
3. Paired with APTX-LL devices, the blue and
green LED lights.
When the headphone is on, press and hold the
power button 2 seconds. And the LED flashes
red and sounds "Power off".
Press the Volume Up V+ button
Press the Volume Down V- button
Press the power button
Press the power button
Press and hold the V+ button for 2s
Press and hold the V- button for 2s
When a call is coming, the LED flashes red twice
every second and press the power button to
answer the call. Then the blue LED lights .
When a call is on line, press the power button.
When playing the music, press the power button
twice to start bass sound effect, press the power
twice again to return.
EN-6