ausdom AH3 Bedienungsanleitung Seite 4

the power button until you see the LED indicator flashes blue
and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. The
voice prompts "Ready to pair, turn on Bluetooth, pin code is
0000."
6.As soon as the computer system detects the new device
and select "AUSDOM AH3". Once successfully paired, the
LED turns to solid blue. You will hear "Pairing completed,
connected".
5-2 Pairing the headphone with a phone
1.Make sure the headphone is off.
2.Do not place both devices more than one meter away from
each other.
3.Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode" waiting to be paired with your
device. The voice prompts "Ready to pair, turn on Bluetooth,
pin code is 0000."
4.Start Wireless function on your phone and search for new
devices.
5.Select the "AUSDOM AH3" to pair. Once successfully
paired, the LED turns to solid blue. You will hear "Pairing
completed, connected".
5-3 Connecting to paired devices
AUSDOM AH3 will pair with the final paired device automati-
cally when turning on, and the other paired devices need to be
manually paired again. Because of different systems, Some
computers or laptops may need to be manually paired every
time.
Note: There will be a prompt voice"Ready to pair, turn on
Bluetooth, pin code is 0000" when first pairing.
EN-3