ausdom AH862 Bedienungsanleitung Seite 8

Bluetooth Headset English
A:Try and Check the following:
Make sure your headset and mobile phone have been paired
and are within the allowed range.
Adjust the speaker volume on the headset by press the volume
up button.
Q: Why doesn't my headset work with the mobile phone?
A:Try and Check the following:
Make sure the headset is charged. The LED indicator is solid
blue when the headset is pairing completed.
Make sure you are within available range of the Bluetooth signal.
It is a long time without pairing and connection with Bluetooth
device, please re-paring again.
Q: My headset is not charging?
A:Try and Check the following:
Make sure to use the USB charging cable.
Connect the cable directly to a USB port on your PC. Do not user
other charging device to charge your headset.
When charging, the LED indicator should solid red. If not, the
USB port may be fail or not providing enough power. Try another
power supply.
Q: Will the headset support other Bluetooth equipment?
A:The headset is designed to work with Bluetooth configuration.
It can also support other Bluetooth devices just for a headset,
hands-free or advance audio distribution profile.
Q: Why doesn't my computer connect the headset via
Bluetooth?
A:Make sure your computer has Bluetooth signal or used the
USB Bluetooth Adapter. And the Bluetooth feature is enabled.
Q: Why won't my headset pair with the mobile phone?
A:Try and Check the following:
Make sure the headset is charged and is in pairing mode. Low
battery may cause the connection fail.
Make sure Bluetooth feature is active on your mobile phone,
and put it into Bluetooth pairing mode.
Make sure the name of pairing connection is correctly. You might
also be prompted to enter the pass code "0000" to accept pairing.
- 7-