4/ Setting Of The Parameters; Control Panel; Control Menu (Depending On Model); On/Off Function - POOL TECHNOLOGIE Minisalt Handbuch

4/ SETTING OF THE PARAMETERS

1

CONTROL PANEL

This user manual includes a certain number of products, the access keys to the functions can be
different according to the models.
Alarm indicator
Supply indicator

CONTROL MENU (depending on model)

2
 Settings adjustment :

Reach the control menu : press 3 s on
Select the function code (In, Co, AL) using

Select the wished value using
(depending on model).
The value appears and the device returns to the main menu.
 Parameters to modify :
Code
Adjust the polarity inversion time
In
To adapt the frequencies of cell cleaning according to the water hardness. The
registered value flashes.
Activate / Deactivate the function of the pool cover
Co
To modulate the production according to the pool cover position.
Activate / Deactivate the alarm
AL
No salt, no water, no flow alarm
*
Originally, the alarm AL is deactivated by default. If necessary, this function invites the user to activate manually
this order.
3

ON/OFF FUNCTION

To stop the device, settle to the 0 (0 %) position with the key
depending on model (after a while, the device will put him in stand-by mode automatically: the panel
and the LED will switch off).
MINISALT – PAPI004086MULTI1- FR/EN/ES/DE – Rev.03.14
Press on one of the following keys
Setting of percentage of
chlorine production
Navigation key
.
V
(depending on model) and confirm by
(depending on model) then confirm using
Fonction
*
:
+
V
-
Alarm indicator
Supply indicator
From Off to 16 h
(see § 5.3, p.21)
(see § 5.4, p.21)
(see § 7.1, p.24)
-
.
V
.
V
Réglage
On / Off
On / Off
19