Stryker 1488 Handbuch Seite 12

Rear Panel
The console rear panel provides ports for connecting the 1488 HD Camera to
viewing and recording equipment, such as video monitors and Stryker device
control consoles.
See the "Product Description" section for the different console models that
are available. The 1488 HD 3-Chip Camera Control Unit with DVI Fiber Output
(1488010001) is shown below.
1. Device Control Port Connects to a Stryker device control console
2. Remote Out 1
3. Remote Out 2
4. S-Video Out
5. DVI Out 1
6. DVI Out 2
7. Light Source Port
8. AC Power Inlet
9. Fuse Panel
10. Equipotential
Ground Plug
11. Fiber Outputs
(optical)
EN-8
1 2 3 4
(such as the SDC3 or SIDNE®) to enable voice
operation and/or graphic tablet control
Connects to a video accessory remote input
Connects to a video accessory remote input
Analog video output
Digital video output
Digital video output
Connects to Stryker L9000 Light Source
(0220210000)
Connects to AC mains with separable power
cord
Contains two 1.6A 250V (slow blow, high
breaking capacity 1500A) fuses
Connects to a potential equalization conductor.
The resulting medical electrical system shall
follow all applicable IEC 60601-1 requirements.
DVI output for connection to Lucent connector
fibers (optional: 1488010001)
5 6 7 8
11
10
9